Makita LS1216 - Blade

Wiring of Laser circuit complete of LS1216L for all countries
[Blade case after removal of Lead cover]
[Laser circuit section viewed from front side]
rib A
rib B
Boss
Pay attention not to pinch
Lead wires between ribs of
Blade case designated in gray
color and Lead cover.
rib C
Route Lead wires of
Laser circuit complete
between ribs as illustrated
above.
Route the Lead wires of
Laser circuit complete
between Rib C and Boss.
Route Lead wires of
Laser circuit complete
between ribs A and B.
Lead cover
Rib
Fig. D-12
Wiring diagram
P 35/ 35