Need help?Do you have a question about the Makita M1901 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Planing Width | 82 mm |
| Planing Depth | 2 mm |
| No Load Speed (RPM) | 16, 000 RPM |
| Power Supply Cord | 2.5 m |
Highlights the double insulation feature for enhanced user safety during operation.
Lists detailed technical data for the planer, including dimensions, speed, and weight.
Explains equipment symbols and the tool's designated purpose for woodworking.
Details power supply, measured noise levels, and vibration emission values according to standards.
Confirms the machine's compliance with relevant European Directives and standards.
Covers safe practices for the work environment and electrical connections to prevent shocks.
Emphasizes operator alertness, use of PPE, and avoiding impairment during use.
Guidance on correct operation, maintenance, and servicing for tool longevity and safety.
Precautions for blade installation, securing workpieces, and initial operational checks.
Advises on avoiding nails, keeping hands clear of moving parts, and dust management.
Explains how to adjust the cutting depth using the front knob and pointer for desired results.
Details the operation of the switch trigger, lock button, and lock-off button for tool control.
General safety advice before starting any assembly or maintenance work on the tool.
Step-by-step guide for safely removing and installing planer blades, including blade selection.
Instructions for replacing mini planer blades, including cleaning and alignment.
Guidance on setting planer blades correctly for a smooth, even planing surface.
Illustrates correct and incorrect planer blade settings and their impact on surface finish.
Instructions for connecting a vacuum cleaner for dust extraction during operation.
Steps for performing planing operations, including starting, speed, pressure, and finishing passes.
How to make stepped cuts using the edge fence (guide rule) for rabbeting.
Instructions for creating chamfered edges using the 'V' groove in the front base.
Safety warnings to follow before performing any inspection or maintenance on the tool.
Guidance on keeping planer blades sharp using a sharpening holder for optimal performance.
Instructions for checking and replacing worn carbon brushes to maintain tool functionality.
Detailed steps for removing old carbon brushes and installing new ones using a screwdriver.
Advises on performing repairs and maintenance by authorized centers using genuine parts.
To Next Page
