13
A B
C H E C K I N G F U S E S
When checking or replacing fuses, always turn the main switch
“OFF” or short-circuits may occur.
Checking procedure:
Put the Tester on “Ω” (sound-emitting function).
Replacing procedure:
Turn key “ON”
Never use fuses with an amperage rating differing from that
indicated. Use only fuses and never other materials. An unsuitable
fuse can cause extensive damage to the electrical system,
malfunctioning of the ignition and light systems and even res
to break out.
•
•
•
•
•
•
•
•
•
To Next Page