Need help?Do you have a question about the Malaguti F10 2008 and is the answer not in the manual?
Information regarding updates and revisions to the manual.
Explains the visual structure and elements of the document pages.
Defines symbols used for guidance and important notes.
Identifies and lists components shown in the wiring diagram.
Explains the color coding for wires in the wiring diagram.
Steps to test switches using a tester for continuity.
Illustrates switch terminal connections and continuity states.
Details the contact continuity for each switch position.
Steps to test fuses for continuity using a tester.
Instructions for safely replacing blown fuses with correct ratings.
Outlines checks for diagnosing ignition system failures.
Tests the primary and secondary winding resistance of the ignition coil.
Measures the resistance of the stator pick-up sensor.
Checks the power supply to the ignition control unit (CDI).
Verifies the function and continuity of the ignition key switch.
Advises checking all wiring connections within the ignition system.
Lists initial checks for starting system malfunctions.
Tests the operation and functionality of the starter motor.
Describes the procedure for testing the starter relay.
Checks the key switch's role in the starting system sequence.
Tests the front and rear brake switches for proper continuity.
Verifies the continuity of the starter button.
Advises checking all wiring connections for the starting system.
Troubleshoots why the battery is not receiving a charge.
Measures the resistance of the charging coil.
Advises checking the wiring connections of the recharging system.
Outlines troubleshooting steps for a complete lighting failure.
Measures the resistance of the lights coil in the stator.
Checks continuity of the red/green wire in the lighting circuit.
Advises checking all wiring connections for the lighting system.
Troubleshoots issues specific to the headlight not functioning.
Diagnoses why the instrument board indicator light is not working.
Troubleshoots the rear light not illuminating.
Outlines checks for complete failure of the signalling system.
Checks the key switch's function within the signalling system.
Advises checking the wiring connections for the signalling system.
Troubleshoots issues preventing the horn from sounding.
Verifies the ground connection for the horn assembly.
Diagnoses why the stop light is not operating.
Checks the voltage supplied to the stop light bulb socket.
Troubleshoots failure of turn signals and their indicator lights.
Checks the voltage supplied to the flashlight component.
Verifies continuity of the brown/black wire in the signalling circuit.
Diagnoses issues with the oil mixture warning signal.
Troubleshoots incorrect readings from the fuel level indicator.
Verifies the ground connection for the fuel level sensor system.
To Next Page
General