29
5
2
3
4
1
6
7
8
9
PERIODIC MAINTENANCE AND MINOR REPAIR
ENGLISH
B
V
The Owner’s tool bag B is located in the compartment inside the
front left air conveyor; to access this compartment, loosen screw
V and remove the dummy grid.
The service information included in this manual and the tools
provided in the tool kit are intended to assist you in the perform-
ance of preventive maintenance and minor repairs. The tools
provided are sufficient for performing routine maintenance. How-
ever, additional tools, such as a torque wrench, may be neces-
sary to perform certain repair work correctly.
If you do not have the tools or experience required for a
particular job, have a MALAGUTI Dealer perform it for
you.
OWNER’S TOOL BAG
Modifications not approved by MALAGUTI may cause loss
of performance and render the vehicle unsafe for use.
Consult a MALAGUTI Dealer before attempting any
changes.
Regular checks, maintenance, adjustment and lubrication will
keep your vehicle in the safest and most efficient condition pos-
sible. Safety is an obligation of the owner. The maintenance and
lubrication table must be considered as a guide to general main-
tenance and lubricating frequency.
HOWEVER, DEPENDING ON THE WEATHER, TERRAIN, GEO-
GRAPHICAL LOCATION AND INDIVIDUAL USE, THE MAINTE-
NANCE INTERVALS MAY NEED TO BE SHORTENED.
The following pages provide the most important information con-
cerning checks, maintenance, adjustment and lubrication.
If you are not familiar with vehicle maintenance work,
have a MALAGUTI Dealer do it for you.
To Next Page
Loading...
