EasyManuals Logo

Manitou 120 AETJ L User Manual

Manitou 120 AETJ L
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
1 - 141 - 14
GENERAL INSTRUCTIONS
- Ensure the area is sufficiently ventilated before starting the platform.
- Wear clothes suitable for the maintenance of the platform, avoid wearing jewellery and loose clothes. Tie and protect
your hair, if necessary.
- Stop the engine before conducting any work on the platform, remove the ignition key and disconnect the “Minus”
battery terminal.
- Set the battery cut-out to the OFF position (ELECTRIC PLATFORM).
- Read the operator's manual carefully.
- Carry out all repairs immediately, even if the repairs concerned are minor.
- Repair all leaks immediately, even if the leak concerned is minor.
- Make sure that the disposal of process materials and of spare parts is carried out in total safety and in a ecological
way.
- Be careful of the risk of burning and splashing (exhaust, radiator, I.C. engine, etc.).
MAINTENANCE
- Perform the periodic service (see : 3 - MAINTENANCE) to keep your platform in good working conditions. Failure to
perform the periodic service may cancel the contractual guarantee.
LUBRICANT AND FUEL LEVELS
- Use the recommended lubricants (never use contaminated lubricants).
- Do not fill the fuel tank when the I.C. engine is running.
- Only fill up the fuel tank in areas specified for this purpose.
- Do not fill the fuel tank to the maximum level.
- Do not smoke or approach the platform with a flame, when the fuel tank is open or is being filled.
LEVEL OF ELECTROLYTE IN THE BATTERY
- Check the level of the battery or batteries.
When doing this, ensure you take all the safety precautions (See: 3 - MAINTENANCE).
HYDRAULIC
- Make any repairs and fix any leaks, including minor ones, immediately.
- Do not attempt to loosen unions, hoses or any hydraulic component with the circuit under pressure.
BALANCING VALVE : It is dangerous to change the setting and remove the balancing valves or safety valves which
may be fitted to your platform cylinders. These operations must only be performed by
approved personnel (consult your dealer).
PLATFORM MAINTENANCE INSTRUCTIONS

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitou 120 AETJ L and is the answer not in the manual?

Manitou 120 AETJ L Specifications

General IconGeneral
BrandManitou
Model120 AETJ L
CategoryLifting Systems
LanguageEnglish

Related product manuals