1 - 5
For operation under average climatic conditions, i.e. : between -15 °C and + 35 °C, correct levels of lubricants in all the circuits are checked
in production. For operation under more severe climatic conditions, before starting up, it is necessary to drain all the circuits, then ensure
correct levels of lubricants using lubricants properly suited to the relevant ambient temperatures. It is the same for the cooling liquid.
- A platform operating in an area without fire extinguishing equipment must be equipped with an individual extinguisher.
There are solutions, consult your dealer.
Your platform is designed for outdoor use under normal atmospheric conditions and indoor use in suitably aerated and ventilated
premises. It is prohibited to use the platform in areas where there is a risk of fire or which are potentially explosive (e.g. Refineries,
fuel or gas depots, stores of inflammable products…). For use in these areas, specific equipment is available (ask your dealer for
information).
C - MODIFYING THE PLATFORM
- For your safety and that of others, you must not change the structure and settings of the various components used in
your platform (hydraulic pressure, calibrating limiters, I.C. engine speed, addition of extra equipment, addition of coun-
terweight, unapproved attachments, alarm systems, etc.) yourself. In this event, the manufacturer cannot be held res-
ponsible.
THE INSTRUCTIONS
- The operator's manual must always be in good condition and kept in the place provided on the platform and in the lan-
guage used by the operator.
- You must necessarily replace the instructions manual, as well as any plates or stickers, if they are no longer legible or
are missing or damaged.
THE MAINTENANCE
- Maintenance or repairs other than those detailed in part : 3 - MAINTENANCE must be carried out by qualified person-
nel (consult your dealer) and under the necessary safety conditions to maintain the health of the operator and any third
party.
Your patform must be inspected periodically to ensure that it remains in compliance. The frequency of this inspection is
defined by current legislation in the country in which the platform is used.
To Next Page
Loading...
Need help?
General
