2
9
MHT 10120 L M
Series
ADJUSTING THE SEAT BACK ANGLE
- Lean against the back, pull the lever and move the seat back into the
position desired
If the back is not held in place when adjusted, it will tip completely forward.
LONGITUDINAL ADJUSTMENT
- Engage the locking lever in the position desired. Once locked in place, the
seat cannot be adjusted further.
CLEANING
Dirt may prevent the seat from functioning correctly; it must therefore always be
kept clean.
- To clean or replace the cushions, simply extract them from the
frame of the seat.
Risk of accident are increased when the seat tips up!
Take care not to wet the cushions’ fabric when cleaning them. First check the
fabric’s resistance to the normal detergents for fabrics and plastics, on a con-
cealed surface.
2
2
-
-
SEAT BELTS
- Sit on the seat correctly.
- Check that the seat belt is not twisted.
- Place the belt over your pelvis, not over your stomach.
- Fasten the seat belt and check that it is firmly engaged.
- Adjust the belt to your physique, so that it does not apply excess pressure
to your pelvic region.
The fork-lift truck may never be used if the seat belt is faulty (mounts, fasten-
ing, seams, tears, etc.). Repair or replace the seat belt immediately.
To Next Page
Loading...
Need help?
General