Manitou Mattoc - Extend Compression Rod; Pressurize Air Chamber

MATTOC TRAVEL ADJUST MANUAL
14
7b
7. Invert fork and aach shock pump to the
air valve. Depress the air release buon on
the pump and pull compression rod out to
fully extended posion. If your shock pump
does not have an air release buon use a
3mm Allen wrench to depress valve core
and extend compression rod.
8. Using a shock pump pressurize the air
chamber. Put in 20-50 PSI.
NOTE: This is to only help hold the
compression rod in place for casng
installaon.
8
h