Manitou Mattoc - Compress and Retract Rod; Insert Cassette Tool; Remove Compression Rod Assembly

MATTOC TRAVEL ADJUST MANUAL
8
7. With shock pump sll aached and
pressure release buon depressed,
compress the compression rod assembly
into the upper stanchion of the fork.
Compress rod unl boom out bumper is
contacng the end cap. If your shock pump
does not have a pressure release buon use
a 3mm Allen wrench to depress the valve
core while pushing compression rod into
stanchion.
8. Place Maoc Cassee Tool into the
compression rod assembly end cap.
9. Using an adjustable wrench or similar
tool, turn the cassee tool counter
clockwise to remove compression rod
assembly from fork stanchion.
7
8
9