4 - 3
- A wide range of attachments studied and perfectly adapted to your lift truck is available and guaranteed by the manufacturer.
- The attachments are delivered with a load chart concerning your lift truck. The operator's manual and the load chart should be
kept in the places provided in the lift truck. For standard attachments, their use is governed by the instructions contained on
this notice.
- Some particular uses require the adaptation of the attachment which is not provided in the price-listed options. Optional
solutions exist, consult your dealer.
It is COMPULSORY for all ATTACHMENTS WITH SUSPENDED LOAD (Hoist, crane jib, crane jib with winch, hook, etc.) to be
used with a fork lift fitted with AUTOMATIC HYDRAULIC MOVEMENT CUT-OFF.
Only attachments approved by the manufacturer are to be used on our lift trucks (See chapter : TECHNICAL SPECIFICATIONS
OF ATTACHMENTS in paragraph : 4 - ADAPTABLE ATTACHMENTS IN OPTION ON THE RANGE). The manufacturer's liability
will be denied in case of modification or of attachment adaptation carried out without his knowing it.
Maximum loads are defined by the capacity of a lift truck taking account of the attachment’s weight and centre of gravity. In
the event of the attachment having less capacity than the lift truck, never exceed this limit.
INTRODUCTION
To Next Page
Loading...
Need help?
General