EasyManuals Logo

Manitou MRT-X 2150 Privilege Plus ST3A S2 Original Operator's Manual

Manitou MRT-X 2150 Privilege Plus ST3A S2
308 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #241 background imageLoading...
Page #241 background image
3-61
IT
EN
ES
648970 IT-EN-ES (04/10/2016)
MRT-X 2150 Privilege Plus ST3A S2 / MRT 2150 Privilege Plus ST4 S2
MRT-X 2550 Privilege Plus ST3A S2 / MRT 2550 Privilege Plus ST4 S2
E5 -Change the oil in the gearbox
Set the truck on a horizontal surface with
the engine off and the oil in the reduction
gear still hot. Place a receptacle under
drain plug 1 (fig. E5). Remove plug 1 and
allow the oil to drain out. Remove fill and
level plug 1 (fig. E5) to ensure that all oil
has drained out. Refit and tighten plug
1 (fig. E5). Fill with oil (see “LUBRICANT
chart) through fill and level plug 1 (fig. E5).
The level is correct when flush with the top
of the hole.
Refit and tighten fill and level plug 1 (fig.
E5).
Check for any leaks from the drain plug.
E5
1
E5 - Sostituire olio scatola cambio
Posizionare il carrello su di una superficie
orizzontale con il motore fermo e l’olio del
riduttore ancora caldo. Porre un recipiente
sotto al tappo di svuotamento 1(fig.E5).
Togliere il tappo 1 e lasciare defluire l’olio.
Togliere il tappo di livello e riempimento
1 (fig.E5) per assicurare uno svuotamento
completo. Rimettere e serrare il tappo 1 (fig.
E5). Mettere l’olio (vedere “LUBRIFICANTI”)
attraverso il foro di livello e riempimento
1 (fig.E5). Il livello è corretto quando l’olio
affiora dal foro.
Rimettere e stringere il tappo di livello e
riempimento 1 (fig.E5).
Controllare eventuali perdite dal tappo di
svuotamento.
E5 - Sustituir el aceite de la caja de cambios
Posicionar el carro sobre una superficie
horizontal, con el motor detenido y el aceite
del reductor todavía caliente. Poner una
cubeta debajo el tapón de vaciado 1 (fig.
E5). Quitar el tapón 1 y dejar fluir el aceite.
Quitar el tapón de nivel de llenado 1 (fig. E5)
para garantizar un vaciado completo. Poner
y apretar el tapón 1 (fig.E5). Llenar con acei-
te (ver “LUBRICANTES”) a través del agujero
de nivel y llenado 1 (fig.E5). El nivel es cor-
recto cuando el aceite fluye por el agujero.
Poner y ajustar el tapón de nivel y llenado
1 (fig.E5).
Controlar eventuales pérdidas del tapón
de vaciado.

Other manuals for Manitou MRT-X 2150 Privilege Plus ST3A S2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitou MRT-X 2150 Privilege Plus ST3A S2 and is the answer not in the manual?

Manitou MRT-X 2150 Privilege Plus ST3A S2 Specifications

General IconGeneral
BrandManitou
ModelMRT-X 2150 Privilege Plus ST3A S2
CategoryConstruction Equipment
LanguageEnglish

Related product manuals