EasyManuals Logo

Manitou MRT-X 2150 Privilege Plus ST3A S2 Original Operator's Manual

Manitou MRT-X 2150 Privilege Plus ST3A S2
308 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
2-41
EN
IT
EN ESES
648970 IT-EN-ES (04/10/2016)
MRT-X 2150 Privilege Plus ST3A S2 / MRT 2150 Privilege Plus ST4 S2
MRT-X 2550 Privilege Plus ST3A S2 / MRT 2550 Privilege Plus ST4 S2
Interruttori zona sottotetto (3.15)
NOTA: la disposizione degli interruttori può
variare a seconda delle opzioni.
INTERRUTTORE GIROFARO
Questo interruttore (1,
3.16) controlla il
funzionamento della luce lampeggiatore.
Sul pulsante (1,
3.16) il led si accende
(2,
3.16) per indicare che la funzione è
attiva.
NOTA: Tranne in caso di emergenza, si
consiglia di disattivare la luce del
faro rotante quando l’accensione
viene spento per evitare una batteria
scarica.
INTERRUTTORE TERGICRISTALLO
TETTO CABINA E LAVAVETRO
Questo interruttore (1,
3.17) spruzza
un liquido pulente sul tetto della cabina
e utilizza il tergicristallo per eliminare il
liquido dal tetto cabina.
Linterruttore (1,
3.17) ha tre posizioni:
- disattivato (0,
3.17);
- per tergicristallo (1a,
3.17);
- per lavavetri (1b,
3.17).
Per disattivare il lavavetri, basta rilasciare
l’interruttore (1b,3.17).
Quando il tergicristallo è attivo (2,
3.17) si
accende il led sull’interruttore.
INTERRUTTORE TERGICRISTALLO
POSTERIORE E LAVAVETRO
Interruttore (1,
3.18) a tre posizioni (0, 1a,
1b,
3.18).
Questo interruttore (1,
3.18) identica
il controllo che attiva il tergicristallo
posteriore (1a,
3.18) ed eroga liquido
di lavaggio (1b,
3.18), avviando un
movimento ampio e spruzzi di liquido per
pulire il parabrezza.
Quando il tergicristallo è attivo si accende
il led (2,
3.18) sull’interruttore (1,3.18).
Per disattivare il lavavetro è suciente
rilasciare (1b,
3.18).
Under roof area switches (
3.15)
NOTE: The location of the switches may
vary depending on the options.
ROTATING BEACON LIGHT SWITCH
This switch (1,3.16) controls the opera-
tion of the rotating beacon light.
On the switch (1,3.16) the led comes on
(2,3.16) to indicate that the function is
active.
NOTE: Except in case of emergency, it is ad-
vised to disable the rotating beacon
light when the ignition is switched
o to avoid a at battery.
CABIN ROOF WIPER AND WASHER
SWITCH
This switch (1,
3.17) sprays a cleaning liq-
uid on the cab roof and uses the wiper to
clear the liquid from the cab roof.
The switch (1,3.17) has three positions:
- deactivated (0,
3.17);
- for window wiper (1a,
3.17);
- for window washer (1b,
3.17).
To deactivate the window washer, just
release the switch (1b,3.17).
On the switch (1,3.17) the led comes on
(2,3.17) to indicate that the function is
active.
REAR WINDOW WASHER AND WIPER
SWITCH
The switch (1,
3.18) has three position (0,
1a, 1b,3.18).
This switch (1,3.18) identies the control
which activates the rear wiper (1a,3.18)
and dispenses washing uid (1b,3.18),
initiating a sweeping motion and uid
spray to clear the windshield.
When the rear wiper is actives lights up the
LED (2,3.18) on the switch (1,3.18).
To deactivate the window washer, just re-
lease the switch (1b,3.18).
0
1b
1a
2
1 3 1
2
2
0
1b
1a
3.15
Interruptores zona techo (3.15)
NOTA: la disposición de los interruptores
puede variar dependiendo de las
opciones.
INTERRUPTOR FARO GIRATORIO
Este interruptor (1,3.16) controla el
funcionamiento de la luz intermitente.
En el botón (1,3.16) se enciende el led
(2,3.16) para indicar que la función está
activada.
NOTA: Excepto en caso de emergencia, se
recomienda desactivar la luz del
faro giratorio cuando se apaga el
encendido para evitar que la batería
se descargue.
INTERRUPTOR LIMPIAPARABRISAS
TECHO CABINA Y LAVACRISTALES
Este interruptor (1,
3.17) rocía un líquido
limpiador en el techo de la cabina y utiliza el
limpiaparabrisas para eliminar el líquido del
techo de la cabina.
El interruptor (1,3.17) tiene tres
posiciones:
- desactivado (0,
3.17);
- para limpiaparabrisas (1a,
3.17);
- para lava-cristales (1b,
3.17).
Para desactivar el lava-cristales, basta
soltar el interruptor (1b,3.17).
Cuando el limpiaparabrisas está activado
(2,3.17) se enciende el led en el
interruptor.
INTERRUPTOR LIMPIAPARABRISAS
TRASERO Y LAVACRISTALES
Interruptor (1,3.18) de tres posiciones (0,
1a, 1b,3.18).
Este interruptor (1,3.18) identica el
control que activa el limpiaparabrisas
trasero (1a,3.18) y suministra el líquido
de lavado (1b,3.18), iniciando un
movimiento amplio y rociados de líquido
para limpiar el parabrisas.
Cuando el limpiaparabrisas está activado se
enciende el led (2,3.18) en el interruptor
(1.3.18).
Para desactivar el lava-cristales basta soltar
el interruptor (1b,3.18).

Other manuals for Manitou MRT-X 2150 Privilege Plus ST3A S2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitou MRT-X 2150 Privilege Plus ST3A S2 and is the answer not in the manual?

Manitou MRT-X 2150 Privilege Plus ST3A S2 Specifications

General IconGeneral
BrandManitou
ModelMRT-X 2150 Privilege Plus ST3A S2
CategoryConstruction Equipment
LanguageEnglish

Related product manuals