Manitou MSI 30 T User Manual

3-29
F2 - FRONT WHEELS REDUCERS OIL
DRAIN
This operation should be carried out once a year if the lift truck has not reached 2000
hours service within the year.
Place the lift truck on level ground with the I.C. engine stopped and the reducers oil still
warm.
Dispose the drain oil in an ecological manner.
- Drain and change each front wheel reducer.
- Place drain plug 1 (fig. F2) in position A.
- Place a container under the drain plug and unscrew the plug.
- Let the oil drain fully.
- Place the drain port in position B, i.e. in a level port.
- Fill up with oil (see : 3 - MAINTENANCE : LUBRICANTS AND FUEL) by level port 1 (fig. F2).
- The level is correct when the oil level is flush with the edge of the hole.
- Refit and tighten the drain plug 1 (fig. F2) (tightening torque 60 to 70 N.m).
F2
1
B
A

Manitou MSI 30 T Specifications

General

Brand	Manitou
Model	MSI 30 T
Category	Tractor
Language	English