2 - 43
BOOM SUSPENSION OPTION (NOT AVAILABLE)
ATTACHMENT EASY HYDRAULIC CONNECTION
For easily connecting and disconnecting the attachment.
- Press for two seconds on the push-button to release the attachment circuit hydraulic pressure. Screens
and
will be alternately displayed.
- Connect or disconnect the rapid connectors of the hydraulic attachment (see: 4 - OPTIONAL ATTACHMENTS FOR USE
WITH THE RANGE: PICKING UP THE ATTACHMENTS).
REAR FOG LIGHT
Only works when the low beam or main beam lights are switched on. The indicator will light when in use.
FRONT WORKING HEADLIGHTS OPTION
ROTATING BEACON LIGHT
NOTE: Except in case of emergency, it is advised to disable the revolving light when the ignition is switched off to avoid
a flat battery.
MENU SCREEN DISPLAY
A flashing lamp indicates a fault (see: 2 - DESCRIPTION: 6D - SCREEN DISPLAY: MENU SCREEN).
CANCEL OR BACK
CONFIRM
TESTING THE LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE
See: 2 - DESCRIPTION: 7 - LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE.
FAN REVERSAL OPTION (NOT AVAILABLE)
HAND-OPERATED PARKING BRAKE
The hand-operated or automatic (by default) parking brake can be configured from the OPT menu in the menu screen.
HAZARD WARNING LIGHTS
Enables the L.H. and R.H. Indicators to be switched on simultaneously, with the ignition off.
NOTA: Except in case of emergency, it is advised to disable the hazard warning lights when the ignition is switched off
to avoid a flat battery.
647104 (13/06/2016)
MT 835 / 1135 / 1335 ST3B
To Next Page
Loading...