1-17
STACKY operating and safety instructions2012.12
STACKER DECOMMISSIONING AND DISPOSAL
DECOMMISSIONING
The operator must remove the stacker from service under the following conditions :
• Immediately an anomaly is detected in the operation of the machine,
• The moment the condition of the machine no longer allows safe working (cracks or deformations in the fork arms,
wheels in poor condition, tool in poor condition, etc.),
• Safety devices are missing or not working,
• The regulatory markings on the machine are no longer legible,
• If there are unauthorised persons within the danger zone (1.5 times the maximum stacker lift height),
• The moment the trac conditions prevent safe working (slippery oor, congested circulation aisles, etc.).
The operator must then shut down the stacker in accordance with the instructions given in paragraph G “Shutting-down
the stacker” in the section “INSTRUCTIONS FOR USE, LADEN AND UNLADEN” and inform the line manager of the reasons having
led to the machine being taken out of service.
The machine can only be restarted once the causes for its withdrawal from service have been eliminated.
DISPOSAL
When the machine is such a poor state of repair that it is liable to present a hazard, the user must permanently remove it from
service. Removed parts and drained products must be disposed of in accordance with the currently applicable environmental
protection decrees.
To Next Page
Loading...
Need help?
General
