Manitou STACKY 10 FR S16 User Manual

1-5
STACKY operating and safety instructions2012.12
INSTRUCTIONS TO THE COMPANY MANAGER
THE SITE
Proper management of stacker's area of travel can reduce the risk of accidents. The following basic precautions will contribute
to this :
- passageways must be kept in a good state of repair and free of obstructions,
- ramp gradients must not be too steep,
- pedestrian trac must be controlled.
THE OPERATOR
Only qualied, authorized personnel may use the stacker. This authorization is to be given in writing by the person in the
company, responsible for the use of the stacker, and must be carried by the operator at all times.
Experience has shown that there are a number of inappropriate ways in which the stacker might be used. Such
foreseeable misuse, of which the main examples are listed below, are strictly forbidden :
•The foreseeable abnormal behaviour resulting from ordinary negligence, but which does not result from any wish
to put the machinery to any improper use,
•The reex reactions of a person in the event of a malfunction, incident, fault, etc. during operation of the stacker,
•Behaviour resulting from application of the "principle of least eort" when performing a task,
•For certain machines, the foreseeable behaviour of such persons as : apprentices, teenagers, handicapped persons,
trainees tempted to operate a stacker, operators tempted to operate a stacker to win a bet, in competition or for their
own personal experience.
The person in charge of the equipment must take these criteria into account when assessing whether or not a person will
make a suitable operator.
THE STACKER
A - FITNESS OF THE STACKER FOR PURPOSE
MANITOU has ensured that this stacker is suitable for use under the standard operating conditions dened in this operator's
manual, with a STATIC test coecient of 1,33 and a DYNAMIC test coecient of 1, as specied in standard EN 1726-1 for industrial
trucks.
Before commissioning, the company manager must make sure that the stacker is suitable for the task to be performed,
and perform certain tests (in accordance with current legislation).
B - STACKER MODIFICATION
For your own safety and that of others, you must not change the structure and settings of the various components used in your
stacker by yourself (hydraulic pressure, limiter calibration, addition of extra equipment, unapproved tools, etc.). In this event,
the manufacturer cannot be held liable.
THE INSTRUCTIONS
The operator’s manual must be in good condition and available to the operator at all times.
Operator's manuals and any plates or stickers which are no longer legible or are damaged, must be replaced.
THE MAINTENANCE
Maintenance or repairs other than those detailed in part : 3 - MAINTENANCE must be carried out by qualied personnel (consult
your dealer) and under the necessary safety conditions to preserve the health of the operator and any third party.
Your stacker must be inspected periodically to ensure that it remains in compliance. The frequency of this inspection
is dened by the current legislation applying in the country in which the equipment is used.

Manitou STACKY 10 FR S16 Specifications

General

Brand	Manitou
Model	STACKY 10 FR S16
Category	Lifting Systems
Language	English