Manitowoc convotherm 4 - Page 54

6 Installation
Operating and Installation Instructions UL 54
Installing the covers
1.
Use the long screws to install the left side panel on both units.
2.
Install the left cover for the center adapter:
2.a
Use the two serrated hex flange bolts and a socket wrench with
a width across flats of 8 mm to fasten the center adapter’s baffle
plate onto the left side cover.
2.b
Make sure that the baffle plate’s front is open.
2.c
Mount the left cover on the center adapter.
3.
Mount the right cover on the center adapter.
4.
Install the front cover
5. Knock out the appropriate perforated section on the front cover
as required for the device combination and door being used.
Right-hinged door, bottom
Right-hinged door, top
1 and 2
Disappearing door, bottom
Disappearing door, top
--
Disappearing door, bottom
Right-hinged door, top
2
Right-hinged door, bottom
Disappearing door, top
1
Use a file to deburr the knockout edges.