6 Installation
Operating and Installation Instructions UL 55
6.5 Wall Anchoring Kit (Optional) / Marine Model / Retaining Element
Wall anchoring kit
In order to minimize the risk of the stacking kit toppling over, the stacking kit can be secured to the wall
using the enclosed wall anchoring kit for stacking kits (optional).
1.
Install the wall anchor.
Marine model
Bolt or weld the bottom unit’s feet onto the floor.
Retaining element
Secure the unit so that it cannot be pulled out.
Make sure that electrical and gas connections are not disconnected.
Use an appropriate retaining element for this purpose.
To Next Page
Loading...
