EasyManuals Logo
Home>Manitowoc>Ice Maker>Koolaire K Series

Manitowoc Koolaire K Series User Manual

Manitowoc Koolaire K Series
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Part Number 000012545 Rev 02 11/16 25
Section 4 Maintenance
Step 6 Mix a solution of cleaner and lukewarm water.
Depending upon the amount of mineral buildup, a larger
quantity of solution may be required. Use the ratio in the
table below to mix enough solution to thoroughly clean all
parts.
Solution Type Water Mixed with
Cleaner 1 gal. (4 L) 16 oz (500 ml) cleaner
Step 7 Use 1/2 of the cleaner/water mixture to clean
all components. The cleaner solution will foam when it
contacts lime scale and mineral deposits; once the foaming
stops use a soft-bristle nylon brush, sponge or cloth (NOT
a wire brush) to carefully clean the parts. Soak parts for
5 minutes (15-20 minutes when heavily scaled). Rinse all
components with clean water.
Step 8 While components are soaking, use 1/2 of the
cleaner/water solution to clean all foodzone surfaces of the
ice machine and bin (or dispenser). Use a nylon brush or
cloth to thoroughly clean the following ice machine areas:
Evaporator plastic parts – including top, bottom and
sides
Bin bottom, sides and top
Rinse all areas thoroughly with clean water.
SANITIZING PROCEDURE
Step 9 Mix a solution of sanitizer and lukewarm water.
Solution Type Water Mixed with
Sanitizer 3 gal. (12 L) 2 oz (60 ml) sanitizer
Step 10 Use 1/2 of the sanitizer/water solution to sanitize
all removed components. Use a spray bottle to liberally
apply the solution to all surfaces of the removed parts or
soak the removed parts in the sanitizer/water solution. Do
not rinse parts after sanitizing.
Step 11 Use 1/2 of the sanitizer/water solution to sanitize
all foodzone surfaces of the ice machine and bin (or
dispenser). Use a spray bottle to liberally apply the solution.
When sanitizing, pay particular attention to the following
areas:
Evaporator plastic parts - including top, bottom and
sides
Ice machine base (top of bin) and area above the water
trough
Bin sides and bottom
Do not rinse the sanitized areas.
Step 12 Replace all removed components.
Step 13 Wait 25 minutes.
Step 14 Reapply power to the ice machine and place the
toggle switch in the CLEAN position.
Step 15 Wait until the water trough refills, then add the
proper amount of Manitowoc Ice Machine Sanitizer to the
water trough.
Model Amount of Sanitizer
K0250 K0350 K0420
K0500 K0600 K1000
3 ounces (90 ml)
K1350 K1800 6 ounces (180 ml)
Step 16 After the sanitize cycle is complete (approximately
24 minutes) move the toggle switch to the ICE position to
start ice making.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc Koolaire K Series and is the answer not in the manual?

Manitowoc Koolaire K Series Specifications

General IconGeneral
BrandManitowoc
ModelKoolaire K Series
CategoryIce Maker
LanguageEnglish

Related product manuals