4
5001192
Revision 03 February, 2003
Installation and Service Manual
SAFETY INSTRUCTIONS
Installation and start-up of this equipment should be done by a qualified service technician. Operation,
maintenance, and cleaning information in this manual are provided for the user/operator of the equipment.
DAILY CHECK LIST FOR THE OPERATOR
• Check CO
2
supply. If CO
2
supply is low, an arrow on
the primary regulator gauge will point to a shaded
area that reads “Low CO
2
” or “Change CO
2
Cylin-
der.”
• Check Syrup supply.
• Clean drain pan, grid, and splash panel. See daily
cleaning instructions on page 18.
• Clean the valve nozzles and diffusers. See daily
cleaning instructions on page 18.
To Next Page
Loading...
Need help?
General