RATED CAPACITY LIMITER NTC55 OPERATOR MANUAL
7-22 Published 9-26-2018 Control # 646-02
1. Find the fault code you want to research in the RCL
diagnostics screen. For more information, see
“Diagnostic” on page 7-19.
2. Open the Manitowoc Diagnostics Code Application on
your smart device.
The Diagnostic Code Application splash screen
appears.
3. Click NBT.
The NBT - Boomtrucks screen appears.
4. Complete the following using information from the error
code displayed on the RCL:
• Select Crane Type—Select the NBT crane type
from the dropdown list.
• Device—Enter the device number from the fault
code.
• Group—Enter the group information from the fault
code.
• Component—Enter the component information from
the fault code.
• Number—Enter the number information from the
fault code.
To Next Page
Loading...
