EasyManuals Logo
Home>Manitowoc>Construction Equipment>NTC55

Manitowoc NTC55 User Manual

Manitowoc NTC55
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
2-8 Published 9-26-2018 Control # 646-02
SAFETY PRECAUTIONS NTC55 OPERATOR MANUAL
NOTE: This condition is limited to operation with the main
boom on fully extended outriggers only.
c) If V(z) is > 20.1 m/s (45 mph), then lifting is NOT
permitted. Cease lifting operations and lower and retract
the boom.
In both cases a) and b) above, the lift may also be limited by
the projected wind area of the load Ap and by the wind drag
coefficient Cd: This limit can be determined by comparing
the Actual wind resistance area with the Allowable wind
resistance area.
Refer to Figure 2-1 for a simplified calculation method to
determine permissible wind speed.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc NTC55 and is the answer not in the manual?

Manitowoc NTC55 Specifications

General IconGeneral
BrandManitowoc
ModelNTC55
CategoryConstruction Equipment
LanguageEnglish

Related product manuals