2-40 Published 9-26-2018 Control # 646-02
SAFETY PRECAUTIONS NTC55 OPERATOR MANUAL
The following illustrations may not be an exact
representation of your crane and are to be used for reference
only.
NOTE: If your crane is equipped with CraneSTAR, an
overload warning will be posted to the web site for
review by the crane owner.
Overload warnings do NOT indicate real time
events! Warnings could be sent 24 hours (or more)
after the actual event.
WARNING
Overload Hazard!
To avoid an accident caused by overload damage to your
crane:
• Perform the inspections outlined in this publication
for overloads up to 50%.
• Stop operating the crane and contact Manitowoc
Crane Care immediately for overloads of 50% and
higher.
To Next Page
Loading...
Need help?
General
