34 Part Number: 040006847 12/19
Operational Checks
GENERAL
Your ice machine was factory-operated and adjusted
before shipment. Normally, a newly installed ice machine
does not require any adjustment.
To ensure proper operation, always follow these
Operational Checks when starting the ice machine:
• for the first time;
• after a prolonged out of service period;
• after cleaning and sanitizing.
Routine adjustments and maintenance procedures
outlined in this manual are not covered by the warranty.
Important
It is recommended that adjustments made to this ice
machine be made by a qualified technician. Improper
adjustment may seriously affect the life of this ice
machine.
CUBE SHAPE
The standard cube has an average weight of 19 grams.
Notice the normal dimple in the center of the cube.
34
33
Dimple
To Next Page
Loading...
