Marantz AV8802/U1B - Page 69

3.5. 232C Standby Clear Mode
3.5.1. Actions
Switches from 232C standby mode to normal standby mode.
3.5.2. Starting up
Hold down buttons "
ZONE SELECT
" and "
BACK
" at the same time and press the power button to turn on the power.
Select the "
3. RS232C RESET
" using the button "
CURSOR
f
/
d
", and press the button "
ENTER
" to commit the selection.
FLD
L1
1 . S E R V I C E C H E C K
L2
– 3 . R S 2 3 2 C R E S E T
3.6. Operation Info Mode
3.6.1. Actions
This mode displays the accumulated operating time, power on count and each protection count.
3.6.2. Starting up
Hold down buttons "
ZONE SELECT
" and "
BACK
" at the same time and press the power button to turn on the power.
Select the "
4. OP INFO
" using the button "
CURSOR
f
/
d
", and press the button "
ENTER
" to commit the selection.
3.6.3. Operations
Press the "
STATUS
" button after starting this device in Operation Info mode.
The following information is displayed in the following order.
(a) Accumulated operating time
FLD
L1
O p e r a t i o n T i m e
L2
T o t a l : H
       ↑Timedisplay
"
STATUS
"
(b) Power on count
FLD
L1
P o w e r O n T i m e
L2
T o t a l :
       ↑Countdisplay
"
STATUS
"
(Returns to normal display)
69