o
Detailed settings when “Assign Mode” is set to
“9.1ch + Front B”
When “Assign Mode” is set to “9.1ch + Front B”, set the following
items.
n
Pre-out for Front B
Select the PRE OUT connectors used for the front speakers of the
second unit.
FRONT WIDE
(Default):
Connect the front speakers of the second unit to
the FRONT WIDE PRE OUT connectors.
HEIGHT1:
Connect the front speakers of the second unit to
the HEIGHT1 PRE OUT connectors.
SURROUND
BACK:
Connect the front speakers of the second unit to
the SURROUND BACK PRE OUT connectors.
n
Height Speakers
Select the number of the height speakers used in MAIN ZONE.
None: Uses no height speakers.
2 Height Speakers
(Default):
Uses a set of (two) height speakers.
4 Height Speakers: Uses two sets of (four) height speakers.
Using Dolby Speakers:
Select when the Dolby Atmos Enabled
speakers are connected.
Contents Connections Playback Settings Tips Appendix
240
Front panel Display Rear panel Remote Index
To Next Page
Loading...
