CT (Clock Time)
Use this to correct the time of the clock on this unit.
1
During CT reception, press SETUP.
“AUTO Adj hh:mm” is displayed.
2
Press ENTER to set.
“RDS hh:mm” is displayed.
0
The time on the set’s internal clock is updated to the currently
displayed “CT” time.
0
Do not operate any buttons while the time is being updated. If buttons are
operated, CT reception is not possible and the time is not updated.
Contents Connections Playback Settings Tips Appendix
48
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
