RC Learning
Assign operations on this unit to the remote control of your TV. This
enables you to operate this unit with the remote control of your TV.
1
Use ui to select the operation on this unit to be
performed with the remote control of your TV and
press ENTER.
Volume Up / Volume Down / Mute / Power Toggle / Power On /
Power Off / Optical In 1 / Optical In 2 / Analog In
0
The operations indicated by a “*” mark are already assigned to the TV
remote control. To assign an operation to a different button, press ENTER
while the operation is indicated by a “*” mark to remove the “*” mark, then
configure the setting again.
2
Follow the instructions in the display to configure the
setting.
The set operation on this unit is indicated by a “*” mark after the
setting is complete.
0
Some remote controls may not be compatible with the “RC Learning” function.
CD Auto-Play
When the disc tray is closed, the unit can detect the CD, automatically
switch the input source to “CD” and start playback.
On
(Default):
Performs automatic playback.
Off: Does not perform automatic playback.
Illumination
You can set front panel illumination to on or off.
On
(Default):
Illuminates.
Off: Does not illuminate.
Contents Connections Playback Settings Tips Appendix
70
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
