o
Response
Switches the frequency characteristics of the speaker output. Set as
desired.
Flat
(Default):
Properties are flat.
Response1:
Cuts low frequencies 40 Hz or under by
–12 dB/oct.
Response2:
Cuts low frequencies 60 Hz or under by
–12 dB/oct.
Response3:
Cuts low frequencies 80 Hz or under by
–12 dB/oct.
Response4:
Cuts low frequencies 100 Hz or under by
–12 dB/oct.
0
When the “Speaker Config” - “Amplifier Mode” setting is “Standard”,
SPEAKERS A/B terminals can be set individually.
0
The “Response” setting is not reflected in headphones, audio or subwoofer
output.
Contents
Connections Playback Settings Tips Appendix
66
Front panel Rear panel
Remote control
unit
Index
To Next Page
