Audio from digital devices cannot be played back (Optical)
“Signal Unlock” is displayed.
0
When digital audio signals cannot be detected properly, “Signal Unlock” is displayed. (v p. 53)
“Unsupported” is displayed.
0
“Unsupported” is displayed when audio signals that are not supported by this unit are input. Check the audio output signal format from your digital
device. (v p. 53)
The input source switches to “Optical In 1” or “Optical In 2”
The input source automatically switches to “Optical In 1” or “Optical In 2” when the TV connected to this unit is turned on.
0
Set “TV Auto-Play” on the menu to “Off”. (v p. 69)
Contents
Connections Playback Settings Tips Appendix
85
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
