Troubleshooting
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other devices operating properly?
If this unit does not operate properly, check the items listed in the table below.
Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
o
Power does not turn on / Power is turned off
Symptom Cause / Solution Page
Power is not turned on.
0
Check whether the power plug is correctly inserted into the power outlet. 33
0
This unit is in standby mode. Press X on the unit or POWER X on the remote control.
35
Power automatically turns
off.
0
The sleep timer is set. Turn on the power again. 37
0
“Auto-Standby” is set. “Auto-Standby” is triggered when there is no operation for a set amount of time. To
disable “Auto-Standby”, set “Auto-Standby” on the menu to “Off”.
88
o
LED is flashing
Symptom Cause / Solution Page
Flashing red.
0
A circuit in the unit has malfunctioned. Disconnect the power and contact the repair center. －
Contents Connections Playback Settings Tips Appendix
103
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
