Marantz NA6005 - Network Settings; Web Control Function

Web control function
You can control this unit from a web control screen on a web browser.
.
PC
Router
This unit
0
This unit and the PC need to be connected to the network properly in order to use
the web control function. (v
p. 28)
0
Depending on the settings of your security-related software, you may not be able
to access this unit from your PC. If this is the case, then change the settings of the
security-related software.
Controlling the unit from a web control
1
Switch the “Network Control” setting to “On”.
(v p. 92)
2
Check the IP address of this unit with “Network
Information”.
(v p. 92)
.
IP Address
[Network Information ]
192.168.0.2
Checking the IP address.
3
Start up the web browser.
Contents Connections Playback Settings Tips Appendix
75
Front panel Rear panel
Remote control
unit
Index