Marantz NR1508 - Radiator Assy; Digital Pcb

Proceeding : TOP COVER → RADIATOR ASSY
(1) Remove the screws.
(2) Cut the wire clamps, then remove the CORD HOLDERs and connectors.
Remove the screws. Remove the FFC.
(3) Remove the CORD HOLDERs and connectors.
3. RADIATOR ASSY
View from the bottom
↓Shooting direction: D↓ ↓Shooting direction: C↓
x7
x2 x1
FFC FFC
N1021
N1006
CP4401
CORD HOLDER
CUT
CP4802
CP4800
CP4801
CORD HOLDER
Proceeding : TOP COVER → WiFi ANT → DIGITAL PCB
(1) Remove the screws.
(2) Cut the wire clamps, then remove the CORD HOLDERs and connectors.
Remove the FFC.
(3) Remove the connector.
4. DIGITAL PCB
↑Shooting direction: A↑
x2x6
x1
FFC FFC
N1021
N1006
N1033
CORD HOLDER
CUT
N1005N1007
N1001
N1003
N1022
60
Caution in
servicing
Electrical Mechanical Repair Information Updating