Marantz SR7010 - Rear Panel (2 of 3)

HOME
Rear Panel (2 of 3)
REAR PANEL (3 of 3)REAR PANEL (1 of 3)
10
FLASHER IN jack
Used when using a control BOX or other such control devices
to control
this unit.
SIGNAL GND terminal
Used to connect a ground wire for the turntable.
network.
REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to
operate this unit and external devices from a different room.
Video connectors (VIDEO)
Used to connect devices equipped with video connectors.
 “Connection 3 : TV equipped without an HDMI connector”.
 “Connecting a set-top box (Satellite tuner/cable TV)”
 “Connecting a DVD player or Blu-ray Disc player”.
HDMI connectors
Used to connect devices equipped with HDMI connectors.
 “Connection 1 : TV equipped with an HDMI connector and
compatible with the ARC (Audio Return Channel)”.
 “Connection 2 : TV equipped with an HDMI connector and
incompatible with the ARC (Audio Return Channel)”.
 “Connecting a set-top box (Satellite tuner/cable TV)”
 “Connecting a DVD player or Blu-ray Disc player”.
NETWORK connector
Used to connect to a LAN cable when connecting to a wired
LAN
AC inlet (AC IN)
Used to connect the power cord.
5
6
7
8
9
10
11