Marantz SR7010 - SR7010 - Protection History Display Mode (1 of 3)

SR7010 - Protection History Display Mode (1 of 3)
28
BACK
ZONE SELECT
POWER
Protection History Mode records and displays an event in which the THERMAL, CURRENT, ASO or DC protection was activated.
STATUS
ENTER
Procedure to enter the “Protection History Display Mode”.
1. Press and hold the “ZONE SELECT and the “BACK” buttons at the same time and press the “POWER” button to turn on the
power.
2. The unit enters the “Diagnostic Mode/Service Path Check Mode” (Protection History Display, or RS232C Reset) and “SERVICE
CHECK” is first displayed.
3. Press the “CURSOR” button to switch modes and press the "ENTER" button when “Protection History Display Mode” is
displayed.
4. Press the “STATUS” button to display Protection History.
HOME
Protection History Display Mode ProcedureSpecs – Dimensions/Weight
Model Information
Index