Marantz SR7011 - Upgrade

Upgrade
Upgrade (Auro-3D)
The text marked with this symbol that will enable after the upgrade of the Auro-3D.
You can experience the best performance of Auro-3D if you install Front Height and Surround Height in addition to standard 5.1-channel. The “Setup
Assistant” will lead you to this setting.
You can use Rear Height speakers from a Dolby Atmos Enabled speaker setup instead of Surround Height speakers for Auro-3D playback.
This unit also can play Auro-3D using standard 5.1-channel and Front Height speakers. If you install any height speakers instead of Surround Height
speakers and Rear Height speakers, you can set the speaker configuration in setup menu.
Auro-3D
Features
High quality sound 11
Connecting speakers
Speaker installation 37, 40
Layout including height speakers and ceiling speakers 43
Speaker configuration and “Amp Assign” settings 49
Auro-3D 9.1/10.1-channel system 61, 67
Selecting a sound mode
Description of sound mode types Auro-3D sound mode 151
Sound mode that can be selected for each input signal 157
Audio
Auro-Matic 3D Preset 187
Auro-Matic 3D Strength 188
Manual Setup
Amp Assign 229, 232
Speaker Config. 237, 238
Appendix
Sound modes and channel output 314
Sound mode and surround parameters 317
Types of input signals, and corresponding sound modes 321
Explanation of terms 324
Trademark information 334
Contents Connections Playback Settings Tips Appendix
7
Front panel Display Rear panel Remote Index