Marconi Instruments 2040 - Page 117

SWEEP
(continued)
:HOP
:<cmd>
:START
:STOP
Datatype :
Allowed suffices
:
Default suffix
:
:STEP
Datatype :
Allowed suffices :
Default suffix
:
:TIME
Datatype
:
Allowed suffices
:
Default
suffix
:
:MKRNUM
Datatype
:
Allowed
suffices
:
Default suffix
:
:MKROFF
:MKRON
Datatype
:
Allowed suffices :
Default suffix
:
:VALUE
Datatype :
Allowed suffices
:
Default suffix
:
SWEEP?
Sample responses:
[not used
alonel
Select Frequency Hopping
sweep
parameter entry where
<cmd> is replaced by TIME.
Select start value of the parameter to be
swept.
Select stop value
of
the parameter to be swept.
As used for the parameter
As used for the parameter
As used for the parameter
Select number of steps in the sweep.
Decimal Numeric
Program Data
None
None
Select time per sweep step
Decimal Numeric Program Data
MS
MS
Select marker
Decimal
Numeric Program
Data
None
None
Turn Current Marker OFF
Turn Current Marker ON
None
None
None
Set
Value
of Current Marker
Decimal Numeric Program Data
As used for the parameter
As used for the parameter
Prepares message containing information on Sweep
Mode, Type and Marker status in the
following
format:
:SWEEP:MODE <mode>;TYPE <type>;<status>
where: <mode>
is
a program
mnemonic representing
the sweep mode selected, <type> is a program
mnemonic representing the sweep
type
selected and <status> is a program mnemonic
indicating whether the Marker output is
ON or
OFF.
: SWEEP: MODE CONT ; TYPE CFRQ ; MKROFF
: SWEEP: TYPE HOP: MODE SNGL
46882-074C
3-2-33