Thank you…
Thank you for purchasing a Mark-10 Series TT01 digital cap
torque tester, designed to measure bottle cap application and
removal torque.
With proper usage, we are confident that you will get many years
of great service with this product. Mark-10 instruments are
ruggedly built for both laboratory and industrial environments.
This User’s Guide provides setup, safety, and operation
instructions. Dimensions and specifications are also provided.
For additional information or answers to your questions, please
do not hesitate to contact us. Our technical support and
engineering teams are eager to assist you.
Before use, each person who is to use a Series TT01 digital
cap torque tester should be fully trained in appropriate
operation and safety procedures.
TABLE OF CONTENTS
OVERVIEW .........................................................2
POWER ...............................................................3
SETUP ................................................................4
HOME SCREEN AND CONTROLS ...................5
OPERATING MODES .........................................7
CHANGING THE UNITS .....................................7
DIGITAL FILTERS ..............................................7
SET POINTS .......................................................8
BREAK DETECTION ..........................................9
FIRST / SECOND PEAK ................................. 11
DATA MEMORY AND STATISTICS ............... 13
COMMUNICATIONS AND OUTPUTS ............ 15
CALIBRATION ................................................ 19
PASSWORDS .................................................. 23
OTHER SETTINGS .......................................... 24
SPECIFICATIONS ........................................... 27
To Next Page
Loading...
Need help?
General
