Mark-10 TT01 series - Specifications

Series TT01 Digital Cap Torque Testers User’s Guide
27
16 SPECIFICATIONS
16.1 General
Accuracy:
±0.3% of full scale
Sampling rate:
7,000 Hz
Power:
AC or rechargeable battery. Low battery indicator appears when battery level is low, and tester
powers off automatically when power reaches critical stage.
Battery life:
Backlight on: up to 7 hours of continuous use / Backlight off: up to 24 hours of continuous use
Measurement units:
ozFin, lbFin, kgFcm, Nm, Ncm
Outputs:
USB / RS-232: Configurable up to 115,200 baud.
Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices.
Analog: ±1 VDC, ±0.25% of full scale at capacity.
General purpose: Three open drain outputs, one input.
Set points: Three open drain lines.
Safe overload:
150% of full scale (display shows “OVER” at 110% and above)
Weight:
8.4 lb [3.8 kg]
Included accessories:
Set of four posts, AC adapter, battery, USB cable, NIST-traceable certificate of calibration
Environmental requirements:
40 - 100°F, max. 93% humidity, non-condensating
Warranty:
3 years (see individual statement for further details)
Literature & Software:
Download at: www.mark-10.com/resources
16.2 Dimensions IN [MM]