Need help?Do you have a question about the Mark-10 F Series and is the answer not in the manual?
General| Brand | Mark-10 |
|---|---|
| Model | F Series |
| Category | Test Equipment |
| Language | English |
Describes the primary use of Series F test frames with IntelliMESUR software.
Details the F105, F305, F505, and F505H models and their included items.
Identifies key physical components of the F305-IMT test frame.
Provides instructions for installing the column end cap on the F505H model.
Details the F755, F755S, F1505, and F1505S models and their included items.
Identifies key physical components of the F1505-IMT test frame.
Outlines essential safety checks and procedures to perform before and during operation.
Covers safe procedures for connecting and powering the test frame.
Explains the location and function of the emergency stop switch.
Describes the intended applications for Series F test frames with IntelliMESUR software.
Provides guidance on safely moving and positioning the test frame.
Details proper procedures for mounting and placing the test frame securely.
Explains the function and adjustment of upper and lower limit switches.
Identifies and describes the rear panel connections and outputs available on the test frame.
Guides the installation of FS05 force sensors onto specific Series F frame models.
Guides the installation of R07 force sensors onto specific Series F frame models.
Guides the installation of FS05 force sensors onto specific Series F frame models using an adapter.
Provides instructions for installing force sensors from other manufacturers.
Details the steps for mounting and connecting the IntelliMESUR control panel (tablet).
Lists the necessary hardware specifications for installing IntelliMESUR software.
Provides step-by-step instructions for installing the IntelliMESUR software.
Explains how to launch the IntelliMESUR software on different devices.
Describes the main interface and options available on the IntelliMESUR Home screen.
Displays system information such as serial numbers, software, and firmware versions.
Covers enabling user login, defining permission levels, and managing user accounts.
Provides instructions for calibrating the force sensor for accurate measurements.
Allows configuration of default units, date/time formats, and other software settings.
Details how IntelliMESUR monitors and records overload events.
Explains how to compensate for deflection in grips or fixtures for improved accuracy.
Guides users on how to update the IntelliMESUR software and test frame firmware.
Describes how load and distance measurements are displayed and interpreted.
Explains different modes for controlling the crosshead movement (Jog, Momentary, Maintained, FollowMe).
Details how to establish a datum or reference point for height/length measurements.
Explains how to set the current crosshead position as the Home position.
Configures a test that stops the crosshead at a specified load limit.
Sets up initial parameters before starting a test, including units and data collection.
Specifies target load, direction, speed, and pass/fail limits for a Load Limit test.
Defines which results and statistics to calculate and display after a test.
Configures actions to perform after a test, like returning home or saving data.
Introduces the concept of stringing together multiple test functions into a sequence.
Describes various available steps (Load, Distance, Break, Hold, Loop, Datum, etc.) for building multi-step tests.
Explains how to designate and access saved tests as favorites for quick selection.
Details how to view test results graphically, including controls for analysis.
Describes how to review test results in tabular format, including statistics and pass/fail indicators.
Shows how to view raw data points for a specific test run.
Guides users on generating comprehensive reports with test data, graphs, and information.
Explains how to retrieve previously saved test data and results.
Covers the recommended procedures for calibrating the force sensor for accuracy.
Mentions the verification of speed and distance accuracy and where to get it done.
Explains how to compensate for deflection in grips or fixtures for improved accuracy.
Details routine physical maintenance, including lubrication and component checks.
Provides instructions for removing the Motor Drive Unit for service or repair.
Details routine physical maintenance, including lubrication and component checks.
Provides instructions for removing the Motor Drive Unit for service or repair.
Guides the installation of safety shields to protect the operator from debris.
Explains how to separate the column from the base for mounting or extensions.
Details the installation of double column extensions for specific test frame models.
Lists the technical specifications for various Series F test frame models.
Provides detailed dimensional drawings for different Series F test frame models.
To Next Page
