Mark-10 F Series - Software Installation Process

Series F Test Frames + IntelliMESUR
®
Software User’s Guide
17
TOC 
4.2 Installation
Windows Administrator privileges are required to install IntelliMESUR.
1. Insert the installation flash drive into the device’s USB port, or download the zipped installation
folder. Locate and double-click the file “setup.exe”. The screen appears as follows:
2. Accept the terms, then click Install. All required files will be installed, including the Mark-10 USB
driver. When installation is complete, the screen appears as follows:
3. Click Finish and run IntelliMESUR.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com