Mark-10 F Series - Distance Limit

Series F Test Frames + IntelliMESUR
®
Software User’s Guide
39
TOC 
Folders
Browse to the desired folder locations for test configuration files, data, results, and reports.
Select Next to complete the test setup. When prompted, select Save & Run, Save & Go Home,
or Cancel. If saving the test, the screen appears as follows:
8.2 Distance Limit
A Distance Limit test shares most attributes with a Load Limit test, with the exception of the Basic
Setup panel of the Test Setup step. The panel appears as follows:
The unique settings are as follows:
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com