Need help?Do you have a question about the Mark-10 WT3-201 and is the answer not in the manual?
General| Model | WT3-201 |
|---|---|
| Capacity | 200 lbF |
| Display | LCD |
| Operating Temperature | 40°F - 100°F (5°C - 38°C) |
| Data Sampling Rate | 2, 000 Hz |
| Units | lbf, N, kgf |
| Interface | RS-232 |
| Power Supply | 9V battery or AC adapter |
| Outputs | USB, RS-232 |
| Power | 9V battery or AC adapter |
Outlines essential safety precautions and guidelines for operating the WT3-201 tester.
Explains powering the tester via AC adapter or rechargeable battery.
Describes the elements and indicators displayed on the WT3-201's home screen.
Explains the primary and secondary functions of the tester's control buttons.
Explains Real Time (RT) and Peak (PK) measurement modes.
Explains the purpose of set points for tolerance checking and external device triggering.
Describes the necessary physical setup before performing calibration.
Detailed step-by-step guide for calibrating the WT3-201 tester.
Lists key technical specifications like capacity, accuracy, and dimensions.
To Next Page
