Mark-10 WT3-201 User Manual

Model WT3-201 Wire Crimp Pull Tester User’s Guide
1
Thank you…
Thank you for purchasing a Mark-10 WT3-201 wire crimp
pull tester, designed for pull test applications up to 200 lbF
(1,000 N).
With proper usage, we are confident that you will get many
years of great service with this product. Mark-10
instruments are ruggedly built for many years of service in
laboratory and industrial environments.
This User’s Guide provides setup, safety, and operation
instructions. Dimensions and specifications are also
provided. For additional information or answers to your
questions, please do not hesitate to contact us. Our
technical support and engineering teams are eager to
assist you.
Before use, each person who is to use the WT3-201 should be fully trained in appropriate
operation and safety procedures.
TABLE OF CONTENTS
OVERVIEW .........................................................2
POWER ...............................................................3
SETUP ................................................................4
HOME SCREEN AND CONTROLS ...................6
OPERATING MODES .........................................7
CHANGING THE UNITS .....................................7
DIGITAL FILTERS ..............................................7
SET POINTS .......................................................9
BREAK DETECTION ........................................10
DATA MEMORY AND STATISTICS ................11
COMMUNICATIONS AND OUTPUTS .............13
CALIBRATION .................................................16
PASSWORDS ...................................................19
OTHER SETTINGS ...........................................21
SPECIFICATIONS ............................................23
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Mark-10 WT3-201 Specifications

General

Brand	Mark-10
Model	WT3-201
Category	Test Equipment
Language	English