Mark-10 F Series User Manual

Series F Test Frames + IntelliMESUR
®
Software User’s Guide
37
TOC 
Other
Optionally include the date and time of the test, along with corresponding crosshead speed.
8.1.4 Post-Test Setup
In this step, a number of post-test preferences and settings can be configured.
Basic Setup
Return Home
Crosshead returns to the prevously set Home position at the end of the test.
Save Data
Automatically save all raw, continuous data for each run.
Save Results
Automatically save results for the test. Results are visible in the Results screen.
Default View
When opening a test, default to the Graph view or Results view. Regardless of the default, you
can switch between views after the test has completed.
Graph Setup
Auto-Scale
Auto-Scale automatically increases the X- and Y-axis maximum values as the test proceeds,
ensuring that the graph curve is zoomed in as much as possible while fitting the entire curve.
Maximum & Minimum
To specify fixed maximum and minimum axis values instead of automatical scaling, enter the
desired values.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Mark-10 F Series Specifications

General

Brand	Mark-10
Model	F Series
Category	Test Equipment
Language	English