Mark-10 TT01 series User Manual

Series TT01 Digital Cap Torque Testers User’s Guide
26
For available selections, refer to the Units and Home Screen And Controls sections.
15.6 Restore Default Settings
Default factory settings can be restored by selecting Restore Defaults from the menu. The settings may
be found in the Specifications section. The display appears as follows:
15.7 Information / Welcome Screen
The following screen is displayed at power-up and can be accessed at any time by selecting Information:
RESTORE DEFAULT
SETTINGS?
No
Yes
INITIAL SETTINGS
Units
lbFin
Mode
Real Time
Digital Torque Tester
Series TT01
Model No: MTT01-50
Serial No: 1234567
Version: 1.0
(c) Mark-10 Corp.

Mark-10 TT01 series Specifications

General

Brand	Mark-10
Model	TT01 series
Category	Test Equipment
Language	English