Mark Levinson 383 - Available IR Commands List

36
A complete list of the available IR codes may be found below.
available ir commands The complete list of available IR commands is:
Teach IR
VOLUME UP
VOLUME DOWN
SELECT NEXT
SELECT PREV
INTENSITY
MUTE KEY
POLARITY KEY
STANDBY KEY
ENTER KEY
SETUP KEY
BALANCE KEY
RECORD KEY
EXIT STANDBY
GO STANDBY
GO INPUT 1
GO INPUT 2
GO INPUT 3
GO INPUT 4
GO INPUT 5
GO MUTE
GO UNMUTE
GO BALANCE
EXIT BALANCE
DISPLAY OFF
DISPLAY DIM
DISPLAY HALF
DISPLAY FULL
Using these commands in conjunction with a macro-capable learning
remote control, you should be able to automate almost anything that
the Nº383 is capable of doing.