Mark Levinson #52 - Quick Setup and Listen: Initial Connections; Connecting Controller and Preamplifier

12
N
0
52 RefeReNce PReamPlifieR / Quick-Start Guide
Quick SetuP and liSten
INITIAL CONNECTIONS
CAUTION: Before making connections, make sure the
N
0
52 and all associated components are powered off and
disconnected from electrical outlets.
1. Using one of the supplied DC power cables, connect
the Controller’s left-channel DC Power connector to
the Preamplifier’s left-channel DC Power connector.
Connect the right-channel DC Power connectors using
the other supplied DC power cable.
2. Using the supplied N
0
52 control cable, connect the
Controller’s N
0
52 Control connector to the Preamplifier’s
N
0
52 Control connector.
N
0
52 PREAMPLIFIER
N
0
52 CONTROLLER
Right Channel
DC Power Cable
(supplied)
Left Channel
DC Power Cable
(supplied)
N
0
52
Control Cable
(supplied)