User Guide | BM1000P TOP
EN
17 Nov 2023
TICKET PARAMETERS
Configuration of the ticket header, using the numeric keypad to insert the in-
tended characters. The system is similar to keypad mobile phones, in which the
keys will correspond to dierent letters – it’s possible to see which ones in the
face of the indicator (1 is for punctuation). A list of the available characters and
how they are displayed can be found in the annex.
To navigate between characters the direction keys are used, and enter confirms
the selection.
The header has a width of 20 characters, and the footer of 16.
It is still possible to set up 5 auxiliary fields for the insertion of one-o infor-
mation. These additional fields will be triggered when finishing the ticket with
multiple weighings and will be printed in the foot. The use of each line can be
activated or deactivated during its editing, using the products key.
PRESET TARES
The indicator can hold up to 4 tares for more practical use. The weight of each
one can be inserted with the numeric keypad and the direction keys (to navigate
between digits). To confirm the weight of the tare, press enter; that will open the
next tare, which can be set up or skipped.
To avoid going through all the tares, we can use the numeric keypad to select
the tare that needs to be setup.
Prog-7
Prog-8
To Next Page
Loading...
